NetConnect Tactical Router

System Architecture

  • Processor:
    • Marvell MV78200 (ARM9)
    • Dual 1 GHz processor cores
  • Operating System: Embedded Linux
  • System Memory: 512 MB
  • Hardware Expansion:
    • Daughtercard(s) and/or additional storage via a SUMIT header
    • PCIe, USB 2.0, SPI, SATA, I2C expansion options
  • File System & Data Storage: 1 GB on board NAND flash
  • GPS: Embedded receiver, external antenna port (TNC)
  • Data Ports: 4 Ethernet (10/100/1000), 3 Serial (RS-232 asynch), 4 USB 2.0 (Full/High Speed)
  • Management Port: 1 (RS-232 asynch)
  • Custom Software Applications Support: Base routing software + custom applications

Networking and Routing

  • Routing Protocols: OSPF/RIP/BGP, IGMP/IGMP Proxy, PIM SM, PIM DM
  • QoS: DiffServ, DSCP, EF/AF PHB, RED class, Per-Flow QoS-Aware Routing and Flow Management
  • Security: Firewall, Intrusion Detection, PKI
  • Tunnels: IPSec, GRE, IP-in-IP, PPP, PPPoE
  • Layer 3 Port Mirroring

Management

  • Software Support: SNMPv3, MIB-II, Routing MIBs
  • Management Access: Console Port (CLI), Web-based
  • Diagnostics: POST, On/off-line diagnostics, Fault/Performance Logging

Power

  • Power: MIL-STD-1275D
  • Input: 12–36 VDC (nominal 12W)

Mechanical

  • Enclosure:
    • 1.5 U (half width)
    • 5.250”W x 2.408”H x 7.210”D
  • Mounting: Front/Rear Panel design supports standard 19” rack mount, vehicular tray mount, or mounting plate fabrication for custom installations
  • Weight: < 3 lbs (without custom mounting plate)

Environmental

  • Temperature: MIL-STD 810G, Method 501.5
    • Operating: -40 to 60 °C
    • Non-operating: -60 to 80 °C
  • Altitude: MIL-STD 810G, Method 500.5
    • Non-Operational: 0 to 40K ft, -51 °C (ambient)
    • Operational: 0 to 30K ft, -40 °C or warmer (ambient)
  • Humidity: MIL-STD 810G, Method 507.5
    • Temperature: 20 to 55 °C
    • Humidity: Up to 95% RH
  • Salt Fog: MIL-STD 810G, Method 509.5
  • Dust & Sand: MIL-STD 810G, Method 510.5
    • Dust: Proc I
    • Sand: Proc II
  • Corrosion & Deterioration: MIL-HDBK-1250a
  • Vibration: MIL-STD 810G, Method 514.6 (wheeled and tracked vehicles)
  • Drop & Shock: MIL-STD 810G, Method 516.6
    • Functional Shock: Proc I
    • Transit Drop: Proc IV
    • Bench Handling: Proc VI
  • EMI/EMC: MIL-STD 461F